Dräger Primus User Manual

Ventilation
Synchronized volume-controlled
ventilation with pressure support
(optional)
Pressure support is activated during
volume-controlled ventilation by entering
a value for the level of pressure support.
This can be defined via the soft key
»APPS«,
© Press the soft key »APpS«. When the
key is activated, the last value set for
pressure support appears as the
default value, together with the last
value set for the trigger sensitivity
above it.
e Set and confirm the value for
pressure support with the rotary
knob. When finally confirmed, the
indication »PressSupp in the status
area of the ventilation mode lights up
steadily instead of flashing.
Н the patient was being ventilated
without synchronization when pressure
support was activated, synchronization
will now be activated automatically with
the last trigger setting used.
Synchronization is maintained with the
set
value when pressure support is
deactivated and set to »OFF«.
Pressure support is automatically
deactivated when the trigger is
deactivated and set to »OFF«.
The actual trigger status is shown above
the keys for the ventilation parameters.
56
Primus
000 000000
OO
000
Do
uni
0086
ES
44 Jun. 2003
5
Instructions for Use Primus SW 2.n

Dräger Primus Specifications

General

Type	Anesthesia Workstation
Oxygen Flush	Yes
Ventilation Modes	Pressure Support
Gas Supply	O2, Air, N2O
Vaporizers	Isoflurane, Sevoflurane, Halothane
Patient Monitoring	Airway Pressure
Backup Battery	Yes
Alarms	Apnea, Gas supply failure
Power Supply	AC Mains, Battery Backup