Dräger Primus - Ventilating children

Ventilation
Ventilating children
For tidal volumes VT of less than 200 mL:
@ Use paediatric hoses.
Connecting the breathing hoses
1 Use a Y-piece with connection for sample line.
@ The inspiratory and expiratory microbial filter 654 St should
not be used — this reduces system compliance. 1 —T
2 Connect a 0.5 L breathing bag with socket to the breathing
hose with the large connection sleeves. Slip the breathing
hose over the angled socket. Hang the 0.5 L breathing bag
onto the hook.
3 Slip the breathing hoses with the large sleeves onto the
inspiratory and expiratory sockets and connect the small
sleeves to the Y-piece.
uni_0039
4 Connect the sample line to the Y-piece and water trap.
uni_0040
To determine system compliance and leakage:
5 Firmly connect the Y-piece to the cone.
© To determine system compliance and leakage, | | )
see "Leak test" on page 73.
uni
0041
69
instructions for Use Primus SW 2.n