EasyManuals Logo

Dräger Primus User Manual

Dräger Primus
100 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #30 background imageLoading...
Page #30 background image
Preparation
Connecting
the
endotracheal
aspiration
system
(optional)
©
Prepare
the
endotracheal
aspiration
system
according
to
the
Instructions
for
Use
included
with
the
system.
Depending
on
the
aspiration
version
used:
If
Air
is
used
as
driving
gas:
1
Secure
the
Air
connecting
hose
of
the
endotracheal
aspiration
system
to
the
Air
outlet
on the
back
of
the
gas
supply
block
(optional)
or
directly
to
the
central
gas
supply
(ZV)
for
Air.
For
vacuum-driven
aspiration:
@
Connect
the
vacuum
hose
of
the
endotracheal
aspiration
system
directly
to
the
wall
supply
point.
@
Check
that
the
endotracheal
aspiration
system
is
ready
for
operation
according
to
the
Instructions
for
Use
included
with
the
aspiration
unit.
Connecting
the
power
supply
Connecting
auxiliary
systems
2
Connect
to
auxiliary
sockets
at
the
back
of
the
workstation.
The
auxiliary
sockets
are
not
powered
by
the
uninterruptible
power
supply
UPS
in
the
event
of
a
power
failure!
Do
not
connect
HF
surgical
devices
to
the
auxiliary
sockets!
Connecting
equipment
to
the
auxiliary
power
sockets
may
cause
the
patient
leakage
current
to
rise
above
the
permitted
values
if
a
protective
earth
conductor
should
fail.
The
risk
of
electric
shock
cannot
be
excluded
in
such
cases.
Additional
power
adapter
sockets
must
not
be
connected
to
the
auxiliary
sockets.
Note
the
maximum
power
consumption
of
the
auxiliary
systems
(refer
to
the
corresponding
Instructions
for
Use).
Equipotential
bonding
e.g.
for
intracardial
or
intracranial
operations.
3
Connect
one
end
of
the
earth
cable
to
one
of
the
connecting
pins
located
at
the
back
of
the
workstation.
@
Connect
the
other
end
of
the
earth
cable
to
the
specified
equipotential
bonding
point,
e.g.
on
the
operating
table
or
ceiling
lamp.
4
Connect
equipotential
bonding
to
auxiliary
systems.
30
uni_0010
Instructions
for
Use
Primus
SW
2.n
mi
dom

Table of Contents

Other manuals for Dräger Primus

Preview: Disassembly/Assembly
Disassembly/Assembly2 pages

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dräger Primus and is the answer not in the manual?

Dräger Primus Specifications

General IconGeneral
TypeAnesthesia Workstation
Oxygen FlushYes
Ventilation ModesPressure Support
Gas SupplyO2, Air, N2O
VaporizersIsoflurane, Sevoflurane, Halothane
Patient MonitoringAirway Pressure
Backup BatteryYes
AlarmsApnea, Gas supply failure
Power SupplyAC Mains, Battery Backup

Related product manuals