Dräger Primus - Alarm priorities and alarm signals

Alarms
Alarms
Alarm priorities and alarm
signals
Alarm messages are colour-coded and
assigned to three priority classes by
Primus, depending on their urgency:
Warning = highest priority
(red alarm field)
A warning message requires immediate
action.
Caution = medium priority
(yellow alarm field)
A caution message requires prompt
action.
Advisory/technical message = low
priority (white alarm field)
These messages must be noted and
action taken if necessary.
Messages with low priority may also be
indicated by symbols.
Whenever an alarm message is
displayed, the alarm lamp flashes or
lights up continuously and an acoustic
tone sequence indicates the alarm
priority class:
If alarm limits are violated, the
corresponding measured values will be
highlighted by a coloured background
and will flash. The colour of the
background reflects the colour-coding of
the alarm priority (red, yellow, white).
94
14 Jun. 2003 EM
15:04 100
씨이 31
мнит e
| ne an
KES. 1:19 Trigger= OFF
0082
Instructions for Use Primus SW 2.n