Dräger Primus - Applying the Durasensor DS-100 A

Applying the Durasensor DS-100 A
Reusable sensor for short-term monitoring ot relatively quiet
patients weighing over 40 kg.
The sensor is preferably positioned on the index finger,
although other fingers can also be used. The little finger
should be used if the patient is particularly large or obese.
@ Open the clip slightly and slide the sensor onto the finger.
The tip of the finger must touch the end of the sensor and
the soft padding should rest on the nail and tip of the finger.
The lead should be on top of the finger.
@ Ensure that the finger is not compressed or hurt by the clip.
@ Change the application site after not more than 4 hours in
order to avoid a build-up of blood pressure (blocked
circulation).
Follow the specific Instructions for Use when using other
Nellcor sensors!
Instructions for Use Primus SW 2.n
Monitoring
91
uni
0047