Dräger Primus - Monitoring mode

Monitoring mode
Monitoring can be activated in standby,
for instance for exclusive measurement
of the SpO2 value. Gas is not delivered.
To start the monitoring mode:
1 Press the soft key »monitor. mode«
or
2 Press the ©). key.
To return to standby:
2 Press the O) key again and
confirm via the rotary knob.
Display (example):
All alarms are active in the monitoring
mode compare to the ventilation mode
Man. Spont., see page 97.
Instructions for Use Primus SW 2.n
Monitoring
Primus
OO
00
ODO 000000
осо 000 or
77
uni_0045
0094