Dräger Primus - Page 76

Monitoring
Monitoring
Selecting the standard screen
The standard screen is automatically
displayed whenever a ventilation mode is
selected (Man.Spont., volume mode or
pressure mode). This screen can always
be selected during operation:
1 Press the (oh. key,
or
2 Press the Oe key several times.
Display (example):
The most important parameters are
grouped together on the right and left
sides of the screen.
The three curves are displayed in the
middle (for other standard screens
page 85).
76
Primus ]
000 000000
a
(VI
+ N
14 dun. 2003
15:05
Instructions for Use Primus SW 2.n
uni_0044
0033