Dräger Primus Series User Manual

3
Preparation for Use 4
• Checking Cylinder Supply and Central Gas Supply 4
• Checking Electrical Supply 4
• Checking Compact Breathing System 5
• In Addition … 5
Start Up 6
• Self Test 7
• Leak Test 8
Operation 10
• Monitoring 10
• Setting Fresh Gas Concentrations 10
• Selecting a Ventilation Mode 12
– Spontaneous Breathing “SPONT” 12
– Manual Ventilation “MAN” 12
– Mechanical Ventilation 13
• Switching to Standby 15
• End of Operation 15
• Switch Off 15
Emergency Scenarios 16
• Emergency Start Ups 16
• Power Failure 17
• Gas Supply Failure 18
• Ventilator Failure 19
• Mixer Failure 20
Cleaning 21
Consumable Items 24
Contents

Dräger Primus Series Specifications

General

Type	Anesthesia Workstation
Display	Color Touchscreen
Power Supply	AC Mains (100-240V, 50/60Hz)
Backup Battery	Minimum 30 minutes (depending on configuration and usage)
Tidal Volume Range	20 to 1500 mL
Respiratory Rate	4 to 100 bpm
Inspiratory Time	0.2-5.0 sec
PEEP	0-20 mbar
Gas Supply	O2, N2O, Air
Alarms	Apnea, Gas Supply
Ventilation Modes	Manual, Pressure Support, SIMV
O2 Flush	35 to 45 L/min