Griplever
modeselectlever
releasebutton
Cap
finger
Dispensingchemicals
–Carefullyreadinadvancetheinstructionsheetofthechemicaltobeused,andfollowthespecified
dispensingmethodandprecautionsforusingit.
–Whenusingahydratechemical,firstdispenseatitsspecifiedproportion,putitinabucketorother
containerandallowittodissolvewellbeforehand.
–Whenpouringthesolutioninthetank,besuretousethestrainerprovided.
CAUTION
Priortooperation
1.Makesurethatthebatteryischarged.(Referto
P.10andP.12forhowtochargethebattery.)
2.Confirm that the grip lever isopen (switchoff,
valveclosed).
Starting/Operation
1.Pushthepower switch on the control panel to
theright toturnonpower. (Thelampof the
batterycheckerturnson.)
2.Hold the grip lever to turn ontheswitch and
openthevalve.Thepumpwillstart.
3.
Turnthepressure-regulatingvalveonthecontrol
panelclockwise to increasepressure. *Immediately
afterpoweristurnedonforthefirsttime,pressureis
settotheminimum.(Thefactorydefaultsetting)
4.Adjustpressure using the pressure-regulating
valvewhileobservingthesprayfromthenozzle.
Continuousspraying
Spotspraying
Tostop
1.When the mode select lever is set to spot
straying,releasethe grip lever toturnoffthe
switchandclosethevalve,andsprayingstops.
2.Whenthemodeselectleverissettocontinuous
spraying,pressthelocklevertoreleasethegrip
leverlock,returnthegriplevertotheoriginal
position,turnofftheswitch,andclosethevalve,
andsprayingstops.
3.Pushthepower switch on the control panel to
thelefttoturnoffpower.(Thelampofthe
batterycheckerturnsoff.)