Draper BCSD400T - Whats in the Box; Packaging

5. Identication and Unpacking
– 9 –
5.2 What’s in the Box?
Carefully remove the product from the packaging and
examine it for signs of damage that may have occurred
during shipment.
Before assembling the product, lay the contents out and
check them against the parts shown below. If any part is
damaged or missing, do not attempt to use the product.
Please contact the Draper Helpline; contact details can
be found at the back of this manual.
(A) 1 × Starter/charger unit (not shown)
(B) 1 × Positive clamp and cable
(C) 1 × Foot
(D) 2 × Wheels
(E) 1 × Axle
(F) 3 × M5 × 10mm screws
(G) 5 × Circlips
(H) 2 × Spare 110A fuses
5.3 Packaging
Keep the product packaging for the duration of the
warranty period for reference should the product need to
be returned for repair.
WARNING! Keep packaging materials out of
reach of children. Dispose of packaging
correctly and responsibly and in accordance
with local regulations.
Please visit drapertools.com for our full range of accessories and consumables.
(B)
(C)
(D)
(F)
(H)
(G)
(E)
EN