Vigor2760 Series Quick Start Guide
3
Interface Description
PWR Connector for a power adapter.
I / O
Power switch.
Factory Reset Restore the default settings. Usage: Turn on the
router (ACT LED is blinking). Press the hole and
keep for more than 5 seconds. When you see the
ACT LED begins to blink rapidly than usual, release
the button. Then the router will restart with the
factory default configuration.
VDSL/ADSL Connector for accessing the Internet.
USB (1-2) Connector for USB storage device or printer or 3G
backup.
LAN (1-4) Connectors for local network devices.
To Next Page
Loading...
Need help?
General
