Vigor2760 Series Quick Start Guide
6
1
1
.
.
1
1
.
.
3
3
F
F
o
o
r
r
V
V
i
i
g
g
o
o
r
r
2
2
7
7
6
6
0
0
V
V
n
n
LED Status Explanation
Blinking The router is powered on and running
normally.
(ACT)
Off The router is powered off.
On A PSTN phone call comes (in and out).
However, when the phone call is
disconnected, the LED will be off for
awhile.
(LINE)
Off There is no PSTN phone call.
On The phone connected to this port is
off-hook.
Off The phone connected to this port is
on-hook.
(Phone1/Phone2)
Blinking A phone call comes.
On (Green) The wireless access point is ready.
Blinking
(Green)
The data is transmitting via wireless
connection.
Blinking
(Orange)
Blinks with one second cycle for two
minutes. The WPS function is active.
(Wireless LAN
On/Off/WPS)
Off The wireless access point is turned off.
On The DSL port is connected.
Blinking
(Slowly)
The router is ready.
DSL (Green)
Blinking
(Quickly)
The router is trying to connect to
Internet.
On The port is connected.
~
LAN1/2/3/4
Blinking The data is transmitting.
~
USB1/2
On A USB device is connected and active.