Vigor2760 Series Quick Start Guide
7
Interface Description
PWR Connector for a power adapter.
I / O
Power switch.
Factory Reset Restore the default settings. Usage: Turn on the
router (ACT LED is blinking). Press the hole and
keep for more than 5 seconds. When you see the
ACT LED begins to blink rapidly than usual, release
the button. Then the router will restart with the
factory default configuration.
WLAN
ON/OFF/WPS
WLAN WPS - Press this button for 2 seconds to wait
for client device making network connection through
WPS. When the LED lights up, the WPS connection
will be on.
WLAN ON/OFF - Press the button once to enable
(WLAN LED on) or disable (WLAN LED off)
wireless connection.
VDSL/ADSL Connector for accessing the Internet.
USB (1-2) Connector for USB storage device or printer or
3G/4G backup.
LAN (1-4) Connectors for local network devices.
Interface Description
Line Connector for PSTN life line.
Phone1/Phone2 Connector of analog phone for VoIP communication.
To Next Page
Loading...
Need help?
General
