LAN P1- P5
On The port is connect ed.
Off The port is disconnect ed.
Lef t LED
Blinking The dat a is t ransmit t ing.
On The port is connect ed wit h 1000Mbps.
Right LED
Off The port is connect ed wit h 10/ 100Mbps
No.
Interface Description
(3)
Fact ory
Reset
Rest ore t he default set t ings. Usage: Turn on t he rout er
(ACT LED is blinking). Press t he hole and keep for more t han
5 seconds. When you see t he ACT LED begins t o blink rapidly
t han usual, release t he but t on. Then t he rout er will rest art
wit h t he f act ory def ault configurat ion.
(4) USB
Connect er for a USB device (f or 3G/ 4G USB Modem or
print er or t hermomet er).
WAN1
Connect er for local net work devices or modem f or
accessing Int ernet .
WAN2 / P6
Connect er for local net work devices or modem f or
accessing Int ernet .
It is a swit chable port . It can be used f or LAN connect ion or
WAN connect ion according t o t he set t ings conf igured in
WUI.
(5)
LAN P1-P5 Connect ers for local net work devices.
PWR Connect er for a power adapt er.
(6)
ON/ OFF Power Swit ch.
(7)
Connect er for inst alling LTE ant ennas.
(8) SIM 2/ SIM 1 Slot s for inst alling SIM card.
To Next Page
Loading...
