VigorPro 5300 Series Quick Start Guide
3
Interface Description
Factory Reset Restore the default settings.
Usage: Turn on the router (ACT LED is blinking). Press the hole and keep for
more than 5 seconds. When you see the ACT LED begins to blink rapidly than
usual, release the button. Then the router will restart with the factory default
configuration.
Restart Restart the router forcefully.
WAN(1/2) Connecters for remote networked devices.
LAN (1-4) Connecters for local networked devices.
PWR
Connecter for a power adapter.
ON/OFF
Power Switch.
To Next Page
Loading...
Need help?
General
