EasyManua.ls Logo

Draytek VigorPro 5300 - User Manual

Draytek VigorPro 5300
304 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
VigorPro 5300
Unified Security Firewall
User’s Guide
Version: 2.0
Date: 2008/05/29
Copyright 2008 All rights reserved.
This publication contains information that is protected by copyright. No part may be reproduced, transmitted,
transcribed, stored in a retrieval system, or translated into any language without written permission from the copyright
holders. The scope of delivery and other details are subject to change without prior notice.
Microsoft is a registered trademark of Microsoft Corp.
Windows, Windows 95, 98, Me, NT, 2000, XP and Explorer are trademarks of Microsoft Corp.
Apple and Mac OS are registered trademarks of Apple Computer Inc.
Other products may be trademarks or registered trademarks of their respective manufacturers.

Table of Contents

Other manuals for Draytek VigorPro 5300

Preview: Specifications
Specifications2 pages
Preview: Quick Start Guide
Quick Start Guide58 pages

Questions and Answers

  • D
    dsummersAug 11, 2025
    How to fix Draytek VigorPro 5300 if ISP settings are not OK?
    • J
      Jonathan AcostaAug 11, 2025
      To fix ISP settings that are not OK on your Draytek Network Router: * Ensure the ISP settings are configured correctly. * If using PPPoE, verify that the Enable option is selected and that the Username and Password are correct. * If using Static or Dynamic IP, ensure the Enable option is selected. * If you specify an IP address, confirm that the IP Address, Subnet Mask, and Gateway match the values provided by your ISP. * If using PPTP, check that the Enable option is selected and verify the IP address for the PPTP Server.
  • S
    Scott CarsonAug 19, 2025
    How to reset Draytek VigorPro 5300 Network Router to factory defaults?
    • T
      Troy MarshallAug 19, 2025
      To reset your Draytek Network Router to its factory default settings, you can do so via the web page interface. Alternatively, while the router is running and the ACT LED is blinking, press and hold the RST button for more than 5 seconds.
  • C
    Christopher MendezAug 27, 2025
    How to fix network connection settings on computer for Draytek Network Router?
    • J
      Joshua SandersAug 27, 2025
      To fix the network connection settings on your computer for the Draytek Network Router, select the options to 'Obtain an IP address automatically' and 'Obtain DNS server address automatically'. Also, select 'Using DHCP' from the Configure IPv4 drop-down list.
  • E
    emma75Sep 2, 2025
    How to fix Draytek VigorPro 5300 if hardware status is not OK?
    • B
      Barbara RodriguezSep 2, 2025
      To address a 'Hardware status is not OK' error on your Draytek Network Router, go back to section "2.1 Hardware Installation" and follow the hardware installation steps again, then try again.

Draytek VigorPro 5300 Specifications

General IconGeneral
WirelessYes
VPN SupportYes
FirewallYes
Concurrent VPN Tunnels50
Object-based FirewallYes
Content FilteringYes
VLAN SupportYes
QoS SupportYes
IPSec VPN Tunnels50
LAN Ports4
Routing ProtocolsRIP, OSPF, BGP
Memory1 GB
Power Supply100-240V AC, 50-60Hz
Operating Temperature0°C to 40°C
Operating Humidity10% to 90% non-condensing
WAN Ports2 x 10/100/1000Base-TX, RJ-45

Related product manuals