• Press “YES” button to display the second ON time “12:00 PM ON”, by pressing either of the
buttons “+” or “-“ SELECT your second ON time.
• Press “SET” button to display the second OFF time “12:00 PM OFF”, by pressing either of the
buttons “+” or “-“ SELECT your second OFF time.
(N.B. This second period has been set to the same on and off times; so if you do not want three
switching periods leave these second period settings as they are).
• Press “SET” button to display your third ON time “4.00 PM ON”, by pressing either of the
buttons “+” or “-“ SELECT your third ON time.
• Press “SET” button to display your third OFF time “11.00 PM OFF”, by pressing either of the
buttons “+” or “-“ SELECT your third OFF time.
• After setting the times for the week end you can now make a change to an individual day
(Sat/Sun)
• After setting the third OFF time for Hot Water press “SET” button to display SAT
• Press SET button and the unit will step through SAT and SUN settings. Select the day you wish
to change by pressing the “YES” button and programme your on/off times as shown previously.
(If you do not wish to change any of the weekdays continue by pressing SET button until you
return to the main screen)
Program Options
• Using the “SELECT” buttons at either side of the unit, choose the “TIMED” option so that the
unit will follow the program you have chosen.
OFF = Continuously OFF
TIMED = Switching ON/OFF as programmed
ONCE = ON once from 1st ON to LAST OFF
ON = Continuously ON
Advance Button Function
• You can temporarily override the normal switching times by pushing the button marked
“ADVANCE”. When in timed mode this button switches “ON” to “OFF” or “OFF” to “ON”
as you require, but the normal programme switching times will not be permanently affected.
To Previous Page
Loading...
