Drayton LP722 User Manual

LP722 Quick Guide
The LP722 electronic programmer will automatically switch on and off three times a day if
required. It allows you to choose different timings Mon to Fri and Sat and Sun or individually for
every day of the week if required.
LP722 has a Real Time Clock Module fitted and you will not need to set the day or time as this is
automatically done for you. In addition this unit now automatically adjusts itself for BST and
GMT so you don’t need to change that either.
Important Note:
Before setting unit, press and hold the “SET” and “+” buttons for a minimum of 5 seconds to
reset to defaults (display will go blank).
To set up required ON/OFF times
• Press the “SET” button to display “SET PROG”
• Press “YES” button to display “SET MON TO FRI”,
• Press “YES” button to display “SET CH MON TO FRI”
• Press “YES” button to display the first ON time “6:30 AM ON”, by pressing either of the
buttons “+” or “-“ SELECT your first ON time.

Drayton LP722 Specifications

General

Number of Channels	2
Display	LCD
Boost Function	Yes
Override Function	Yes
Supply Voltage	230V AC
Switching Current	3A

Summary

LP722 Programmer Setup and Features

Device Overview and Initial Configuration

Explains the LP722 programmer's features, real-time clock, automatic BST/GMT adjustment, and how to reset to defaults.

Setting Weekday Central Heating Times

Step-by-step guide to program ON/OFF times for Central Heating from Monday to Friday.

Setting Weekday Hot Water Times

Detailed instructions for setting the ON/OFF times for Hot Water on weekdays (Monday to Friday).

LP722 Weekend Programming

Setting Weekend Central Heating Times

Guide for programming the ON/OFF times for Central Heating on Saturdays and Sundays.

Setting Weekend Hot Water Times

Instructions for setting the ON/OFF times for Hot Water on Saturdays and Sundays.

LP722 Program Options and Functions

Understanding Program Modes

Explains the different program options: OFF, TIMED, ONCE, and ON.

Advance Button Functionality

Describes how to temporarily override normal switching times using the ADVANCE button.