Dreame F9 - Routine Maintenance: Mopping Module; Mopping Module and Water Tank Care

16
4. Wash the dust bin and filter, with water, and then place it aside to dry fully before
reinstalling it.
Note:
 Only clean water should be used to clean the filter. Do not use detergent.
 Filter must be fully dry before use (allow at least 24 hours).
Mopping Module
1. Press the side clips of the mopping module inward and pull to remove the module.
Pull the mop pad off the mopping module to remove it.
2. Empty the remaining water in the water tank and keep it dry naturally: