Dreame RAW4 - Install the Fixing Base

9
EN
Cove of
Storage Bin
1. Open the upper cover, take out the clean water tank, used water tank
and the cover of storage bin.
2. Remove the 2 󶀄xing screws by a screwdriver and take out the storage bin.
3. Pull out plug a1 and a2, store the parts properly.
4. Place the Fixing Base
Ⓒ
at the bottom.
Installation Instruction
❶
Install the Fixing Base
a2
a1
Step
❶-❷
Fixing Base
Ⓒ