23
EN
1. Remove the spiral cable wrap
Ⓟ
.
Note:
· Before disassembly, prepare a container to catch the water flowing out to
avoid damaging the floor.
· Unplug the base station and solenoid valve connector before disassembly.
Close the main water valve and angle valve at home and make sure all the
water in the pipes has been drained.
Disassembly Instruction
2. Remove the connection locking clip
Ⓙ Ⓚ
in position ①-
⑪
.
⑥
④
⑤
⑦
⑧
⑨
⑩
⑪
②
①
③
ONLY REQUIRED IN CASE OF RETURN
Spiral Cable
Wrap
Ⓟ
To Next Page
Loading...
Need help?
General
