20
EN
If the base does not work properly, an error icon and message will be displayed on the display screen. Read the message and handle the issue based on the
following table.
Errors
Error Icon Error Message Solution
Insucient Water in Fresh Tank Add a sucient amount of water to the fresh tank.
Fresh Tank Not Installed Put the fresh tank in place.
Waste Tank Malfunction
Put the waste tank in place.
Empty the wastewater.
Washboard Not Installed
Check whether the washboard is installed and whether the clips on both sides of
the washboard are in place.
Abnormal Washboard Water Level Check whether the waste port is clogged. If yes, clean it.
Robot Malfunction
Check whether an exception occurs to the robot. Please refer to the "FAQ" section
in this manual for troubleshooting.
To Next Page
Loading...
Need help?
General
