Dreame VTN1 - Charging; Charging Methods; LED Battery Status Indicator

8
EN
Charging
Note: A full charge will take approx. 3.5 hours. Using Turbo mode for a prolonged period
will cause the battery to heat up, which increases charging time. Allow the vacuum to cool
down for 30 minutes before charging it.
LEDBatteryStatusIndicator
Note: Once the vacuum is fully charged, the indicator will turn o󽗈 after 5 minutes, and the
vacuum will enter the energy-saving mode.
1
2
Off
Blinking
On
Low battery
Half battery
Nearly full
Fully charged
Chargingthevacuumwiththecharger Chargingthevacuumonthecharging
mount
ChargingMethods
Fully charge the vacuum before using it for the 󽗉rst time.