Dreame VTN1 - How to Use; Working Methods

9
EN
HowtoUse
Method2:ContinuousCleaningMode(ElectronicLock)
Click the electronic lock to switch to Continuous Cleaning Mode when the vacuum is
running. Then release the on/o󽗈 switch to make the vacuum in Continuous Cleaning
Mode.
Use the electronic lock to free your 󽗉ngers and avoid 󽗉nger fatigue caused by holding the
switch.
Note: In this mode, the lock indicator will illuminate steadily. Click the electronic lock again
to quit the Continuous Cleaning Mode.
WorkingMethods
Method1:DiscontinuousCleaningMode
Press and hold the on/o󽗈 switch to power it on, and release it to stop immediately.
Select from two working methods for the vacuum, based on your needs.