12
EN
Care&Maintenance
Tips:
CleaningtheVacuum
CleaningtheDustCup,Pre-Filter,andCycloneAssembly
• Always use genuine parts to keep your warranty from being void.
• If the lter or nozzle becomes clogged, the vacuum will stop working shortly after being
turned on. Clear the tube to restore functionality.
• If the vacuum is not used for an extended period, fully charge it, unplug its charger, and
store it in a cool, low-humidity environment away from direct sunlight. To avoid over-
discharging the battery, recharge the vacuum at least once every three months.
Wipe the vacuum with a soft dry cloth.
The vacuum's cleaning ability will be reduced if the dust cup is lled to the "MAX" mark.
To regain performance, empty the dust cup in a timely manner. Before emptying the dust
cup, make sure the vacuum is disconnected from the power, and do not press its power
button.
2. Push the dust cup release switch in the direction indicated by the arrow, then gently
remove the dust cup from the vacuum.
1. Press the dust cup bottom cover release button, then empty the contents.
2
1
To Next Page
Loading...
Need help?
General
