Dreame VTN1 User Manual

17
EN
CleaningtheMulti-BrushBar
1. Turn the lock counterclockwise until it
stops, then remove the roller brush from
the brush bar.
2. Use scissor to cut o󽗈 the hairs and 󽗉bers
that get stuck on the brush bar head. Wipe
the dust from the notch and transparent
cover with a dry cloth or paper towel.
Thoroughly dry before use.
3. When it is dirty, rinse the roller brush
with clean water until it is clean.
4. Stand the roller brush upright for at
least 24 hours until it is fully dry.
Care&Maintenance
12
6
111
57
210
48
39
24 hrs

Dreame VTN1 Specifications

General

Brand	Dreame
Model	VTN1
Category	Vacuum Cleaner
Language	English