DREAMS LUCIA - Hardware and Fittings Checklist; Hardware for Bed and Slat Frame Assembly; Hardware for Drawer Assembly and Wheels

QtyCode Description
A
x16
Fittings Checklist
C
x16
Spring Washers (for M8 bolt)
D
Qty
Code Description
B
M
Allen Key (for M8 bolt)
x1
Page 2 of 8
Bolts (M8x30mm) for
fitting side panels (3&5)
to headboard & footboard (1&2).
Flat Washers (for M8 bolt)
QtyCode
K
Plastic Barrel Nuts
x14
Screws (3x20mm) for fitting
wheel (N) to wooden drawer
support rails.
x20
S
L
Screws (4x30mm) for fitting
drawer face panel (10)
x8
N
Drawer Wheels
x5
Bolts (M8x45mm)
for fitting
adjustable
support legs (4)
to
side panel (3).
x4
V
x6
Spring Washers (for M6 bolt)
P
Bolts (M6x15mm)
x4
EXTRA HARDWARE SUPPLIED WITH THE UPGRADED SPRUNG SLAT FRAME.
NOTE THAT THESE PARTS ARE NOT TO BE FITTED IN THIS LUCIA SINGLE BED.
8
Support leg
x1
Qty
HARDWARE FOR FITTING WOOD SLATS OR UPGRADED SPRUNG SLAT FRAME (PACK B)
H x1
Allen Key (for M6 bolt)
F x6
Sleeve Nuts -
M6
x6
x6
Flat Washers (for M6 bolt)
G
E
HARDWARE NEEDED FOR BED ASSEMBLY (PACK A)
HARDWARE NEEDED FOR DRAWER ASSEMBLY (PACK C)
Description
Qty
Code
WHEELS FOR DRAWER (PACK D)
Screws (5x50mm) for
assembling drawer panels
J
x14
Description
x20
Code Description Qty Code Description
Bolts (M6x40mm) for fitting
the wooden slat set (6) or
the sprung slat frame (7) to
side panels (3&5)