DREAMS MANHATTAN - Fittings Checklist

QtyCode Description
A
x16
Fittings Checklist
C
x16
Spring Washers (for M8 bolts)
D
Qty
Code Description
B
M
Allen Key (for M8 bolt)
x1
Page 2 of 8
Bolts (M8x30mm) for
fitting side panels (3)
to headboard & footboard (1&2).
Flat Washers (for M8 bolts)
Qty
Code
K
Plastic Barrel Nuts
x28
Screws (3x20mm) for fitting wheels (N) to wooden
drawer support rails.
x40
S
L
Screws (4x30mm) for fitting drawer face panels (10)
x16
N
Drawer Wheels
x10
Bolts (M8x45mm)
for fitting
adjustable
support legs (4)
to
side panels (3).
x8
V
x6
Spring Washers (for M6 bolts)
P
Bolts (M6x15mm) for fitting
eht ot )9&8( sgel troppus
sprung slat frame (7)
x8
EXTRA HARDWARE NEEDED WHEN FITTING UPGRADED SPRUNG SLAT FRAME
Note: The following fittings will be found in the box which contains the upgraded metal frame itself.
8
Sprung slat frame
centre support leg
Sprung slat frame support legs
x1
9
x2
Qty
HARDWARE FOR FITTING WOOD SLATS OR UPGRADED SPRUNG SLAT FRAME (PACK B)
H x1
Allen Key (for M6 bolt)
F x6
Sleeve Nuts -
M6
Bolts (M6x40mm) for fitting
the
the
wooden slat set (5) or
sprung slat frame (7) to
side panels (3)
x6
x7
Flat Washers (for M6 bolts & 5mm screw)
G
E
Screw for Slat Support Leg (6) - 5mm
U
x1
HARDWARE NEEDED FOR BED ASSEMBLY (PACK A)
HARDWARE NEEDED FOR DRAWER ASSEMBLY (PACK C)
Description
Qty
Code
WHEELS FOR DRAWER (PACK D)
Screws (5x50mm) for assembling drawer panels
x28
J
Description
x24
Code Description Qty Code Description