Dremel 100 - Page 25

25
Speed Settings (Continued)
Not all speed settings can be achieved on 100 and 200 series tool. For certain applications,
a variable speed tool is required.
Speed Settings: 2 (5,000 - 8,000 RPM) 4 (9,000 - 15,000 RPM) 6 (16,000 - 21,000 RPM)
8 (22,000 - 27,000 RPM) 10 (28,000 - 35,000 RPM)
* Speed for light cuts, Caution - burning on deep grooves.
• Depending on cutting direction relative to grain.
Tungsten Carbide Cutters
Catalog
Number
Soft
Wood
Hard
Wood
Laminates
/Plastics
Steel
Aluminum,
Brass, etc.
Shell/
Stone
Ceramic Glass
9901, 9902, 9903,
9904, 9905, 9906,
9912
10 8 4 10 6 8 8-10 8-10
9909, 9910, 9911 - - - - - 8 8-10 8-10
High Speed Router Bits
Catalog
Number
Soft
Wood
Hard
Wood
Laminates
/Plastics
Steel
Aluminum,
Brass, etc.
Shell/
Stone
Ceramic Glass
612, 615, 617, 618
640, 650, 652, 654
10* 8• - - - - - -
Silicon Carbide Grinding Stones (blue/green)
Catalog
Number
Soft
Wood
Hard
Wood
Laminates
/Plastics
Steel
Aluminum,
Brass, etc.
Shell/
Stone
Ceramic Glass
83142, 83322,
83702, 84922,
85422, 85602,
85622
- - 6 10 4 6 10 10
Abrasive Wheels / Points
Catalog
Number
Soft
Wood
Hard
Wood
Laminates
/Plastics
Steel
Aluminum,
Brass, etc.
Shell/
Stone
Ceramic Glass
516 4-6 4-6 - 8 6 - - -
500 4-6 4-6 - 6-8 4-6 - - -
EZ541GR - - - 6-8 4-6 - - -
Aluminum oxide grinding stones (orange/brown)
Catalog
Number
Soft
Wood
Hard
Wood
Laminates
/Plastics
Steel
Aluminum,
Brass, etc.
Shell/
Stone
Ceramic Glass
541, 903, 911, 921,
932, 941, 945, 952,
953, 954, 971, 997,
8153, 8175, 8193,
8215
10 10 - 8 4 6 10 -
1600A011JA 11-21 100 200 3000.qxp_100 200 3000 11/22/21 1:07 PM Page 25