To Next PageTo Next Page
Need help?Do you have a question about the Dremel 7300 and is the answer not in the manual?
General| Battery Voltage | 4.8V |
|---|---|
| Speed Settings | 2 |
| Charge Time | 3 hours |
| Collet Size | 1/8 inch |
| Battery Type | NiCd |
| Power Source | Battery |
| Accessories Included | Various grinding, sanding, polishing accessories |
Provides contact details for consumer information and service locations.
Guidelines for maintaining a safe and hazard-free work environment.
Precautions related to electrical connections and usage to prevent shock.
Measures for protecting the operator from injury during tool operation.
Instructions for proper operation, maintenance, and storage of power tools.
Guidelines for using and caring for battery-powered tools and packs.
Information on professional servicing and replacement parts.
Key safety precautions for operating and handling cordless rotary tools.
Warning about hazardous chemicals found in dust from construction activities.
Guidelines for the proper care and maintenance of batteries.
Information on recycling and disposal of nickel-cadmium batteries.
Guidelines for the disposal of commercially available alkaline cells.
Details and specifications for the Dremel Model 7000 Cordless Rotary Tool.
Details and specifications for the Dremel Model 7300 Cordless Rotary Tool.
Information on the different size collets and their usage.
Guidelines for balancing accessories for precision work and maintaining balance.
Overview of the cordless rotary tool's capabilities and operation.
Instructions for removing and inserting the battery pack.
Steps for inserting AA batteries into the Model 7000 battery pack.
Steps for charging the battery pack for the Model 7300 tool.
Key considerations and tips for optimal battery charging and tool longevity.
Guidance on how to hold and operate the tool with gentle pressure.
Explains why slower speeds are sometimes necessary for specific materials.
Information regarding tool service by authorized personnel.
Recommendations for maintaining the tool's DC motor for optimal performance.
Instructions and warnings for safely cleaning the tool.
Guidelines for selecting and using appropriate extension cords.
Details on Screw Mandrel N° 401 for felt polishing tips and wheels.
Recommendations for purchasing and using a set of four collets.
Explanation of mandrels and their use with accessories like discs and wheels.
Details on Small Screw Mandrel N° 402 for cutting wheels and sanding discs.
Information about the EZ Lock system for easy accessory changes.
Description of high-speed cutters used for carving, cutting, and slotting.
Information on tough, long-lived cutters for hard materials.
Details on structured tooth cutters for fast cutting and material removal.
Information on silicon carbide stones for hard materials like glass and ceramics.
Description of aluminum oxide stones for various grinding applications.
Details on diamond wheel points for fine detail work on hard materials.
Information on different types and uses of wire brushes, including speed limits.
Description of bristle brushes for cleaning and polishing tasks.
Guidance on applying correct pressure when using wire brushes to prevent breakage.
Details on polishing points, wheels, and compound for finishing surfaces.
Information on aluminum oxide wheels for paint removal and polishing.
Description of sanding discs, drum sanders, and flapwheels for various sanding jobs.
Details on thin discs for slicing, cutting off, and slotting operations.
Information on grinding wheels for deburring, rust removal, and general grinding.
