Dremel 8300 - Page 19

-19-
FIG. 1-FIG. 9
$'') Sand with a smooth
back and forth motion, allowing the
weight of the tool to do the work.
#$'') Avoid sanding with
only the tip of the pad. Keep as
much sand paper in touch with the
work surface as possible.
$'') Always sand with the
pad and sandpaer flat against the
work surface. Work smoothly in a
back and forth motion.
#$'') Avoid tipping the
pad. Always sand flat.
$'') Always cut with a
smooth back and forth motion.
Never force the blade. Apply light
pressure to guide the tool.
#$'') Do not twist the tool
while cutting.This can cause the
blade to bind.
$'') Make sure flexible
scraper blade flexes enough
#$'') Avoid screw head
touching surface with flexible
scraper blade.
DM 2610011834 07-10:DM 2610011834 07-10.qxp 7/20/10 1:20 PM Page 19