Dremel DigiLab 3D40 FLEX User Manual

ENGLISH
3D40 FLEX Quick Start Guide
STEP 1: GO TO
Digilab.Dremel.com/GetStarted
to set up your printer, download our free slicing software, and access all the
features available with your 3D printer.
WARNING
READ ALL OPERATING/SAFETY INSTRUCTIONS IN THE MANUAL AND FAMILIARIZE YOURSELF WITH THE DREMEL
3D40 BEFORE SETUP AND USE. FAILURE TO COMPLY WITH THE WARNINGS AND INSTRUCTIONS MAY RESULT IN
FIRE, EQUIPMENT DAMAGE, PROPERTY DAMAGE, OR PERSONAL INJURY.
WAITING FOR FLEX PLATE
IMAGE FROM KARAN

Dremel DigiLab 3D40 FLEX Specifications

General

Print Technology	Fused Filament Fabrication (FFF)
Filament Diameter	1.75 mm
Connectivity	USB, Wi-Fi
Software	Dremel DigiLab 3D Slicer
Heated Bed	Yes
Frame	Metal
Nozzle Diameter	0.4 mm
Layer Resolution	50 - 300 microns
Supported Filament Materials	PLA
Display	Full color LCD touchscreen
Power Requirements	100-240V, 50-60Hz

Summary

Dremel DigiLab 3D40 FLEX Quick Start Guide

Get Started Online

Access printer setup, slicing software, and features via Digilab.Dremel.com/GetStarted.

Unboxing and Kit Contents

Unbox Your Printer

Follow illustrated steps to safely remove the printer from its packaging.

Kit Contents

Identify all components included in the printer package.

Offline Setup Guide

Ensure Power Switch is Off

Verify the printer's power switch is in the off position before proceeding.

Install Build Plate Holder

Secure the build plate holder using the provided platform clips.

Load Filament

Prepare and thread the filament spool into the printer's guide tube.

Complete Setup Process

Turn on the printer and follow on-screen prompts for final setup.

Offline Building Instructions

Start a Print

Navigate the main screen to select and print pre-installed models.

Remove Flexible Build Plate

Learn the correct method to detach the flexible build plate from the printer.