To Next PageTo Next Page
Need help?Do you have a question about the Dremel 3D20 Idea Builder and is the answer not in the manual?
General| Printing material | Polylactic acid (PLA) |
|---|---|
| Layer thickness (min) | 0.1 mm |
| Number of print heads | 1 |
| Maximum build size (WxDxH) | 228 x 149 x 139 mm |
| Control type | Touch |
| Product color | Blue, Grey, White |
| Viewing window | Yes |
| Display diagonal | 3.5 \ |
| Display technology | IPS |
| Maximum extruder tip temperature | 230 °C |
| 3D scanner | No |
| Compatible memory cards | SD |
| AC input voltage | 230 V |
| Cables included | USB |
| Number of print platform stickers | 2 |
Weight and Dimensions| Depth | 335 mm |
|---|---|
| Width | 485 mm |
| Height | 400 mm |
| Weight | 8850 g |
Guidelines for maintaining a safe and suitable environment for operating the 3D printer.
Precautions related to the electrical aspects of the Dremel 3D20 to prevent shock hazards.
Advice on protecting oneself while operating the 3D printer, including protective equipment.
Specifications related to the Dremel 3D20's building process and capabilities.
Details about the Dremel 3D software, its features, and system requirements.
Minimum PC specifications needed to run the Dremel 3D software effectively.
Input voltage, frequency, and current rating for the Dremel 3D20.
Recommended environmental conditions for optimal operation of the Dremel 3D20.
Instructions on how to level the build platform for optimal object adhesion and quality.
Steps to clear filament blockages from the extruder using the unclogging tool.
How to safely clean the extruder nozzle, including precautions for hot surfaces.
Guide for cleaning the external surfaces of the Dremel 3D20 with a lint-free cloth.
Method for cleaning the touch screen display without causing damage.
