Why does cloud slicer show Dremel 3D45 printer offline?
If the cloud slicer will not connect to your Dremel 3D45 or shows "printer offline", check the 3D45 network settings and retry the connection, as the 3D45 may not be connected to the network.
How to fix filament not sticking to build platform on Dremel 3D45 3D Printers?
If the filament isn't extruding or sticking properly to the build platform of your Dremel 3D Printers, it could be due to the build platform not being level with the extruder head. Leveling the build platform will align the extruder head and ensure better object quality. Cancel your object, clear the build platform, level it, and then restart the object.
How to fix Dremel 3D45 that froze before print?
If the Dremel 3D45 froze before your object started, it might have received conflicting commands. To resolve this, turn the power switch off, wait 30 seconds, and then turn the power switch back on.
What to do if Dremel 3D Printers build did not start when sent over network?
If your Dremel 3D printer build didn't start when sent over the network, consider the following: * **Filament:** Ensure you have enough filament. Load additional filament and resume the build. * **Doors:** The doors must be closed to start builds over your network; start the build from the print queue. * **Build Plate:** The build plate must be clear to start a build over your network; clear the build plate and start the build from the print queue.
Why Dremel 3D Printers 3D45 will not retrieve a token?
If your Dremel 3D45 printer won't retrieve a token, it could be due to: * Incorrect network password. Re-enter your password or verify it with your network owner. * Your network has a firewall. Try entering network proxy information.
How to fix invalid token on Dremel 3D45 3D Printers?
Use "Get new token" to generate a new token and retry connection. Note this will remove any users that are sharing your printer.
Why won't my Dremel 3D45 connect to my network?
If your Dremel 3D45 won't connect to your network, try repositioning it closer to your wireless router. Also, double-check and re-enter your network password or SSID, or verify the password with your network owner, as an incorrect password or SSID could be the reason.
What to do if Dremel 3D45 3D Printers print ends in spaghetti mess?
If you see a spaghetti mess at the end of your Dremel 3D Printers build, it could be because a layer of your object didn't stick properly, the model was saved with minimal surface area contacting the build platform, or the object was built floating above the build platform without supports. Also, the Z-Gap offset may not be correct, causing improper spacing between the extruder tip and the build platform. Use the preview feature in your slicing software to check the first layer height and position. Build with supports when necessary. Contact customer service on how to calibrate the Z-Gap Offset.
What to do if Dremel 3D45 will not retrieve token?
If your Dremel 3D45 will not retrieve a token, re-enter your password or verify your password with your network owner, as the network password might be incorrect. If that doesn't work, your network may have a firewall, so enter network proxy information.
Why is my Dremel 3D45 3D Printers part only built halfway?
If your Dremel 3D Printers part only built halfway, it may be because the filament ran out or the filament clogged during the build. Replace the filament and resume the build. See “No filament coming out”.
Guidelines for maintaining a clean and safe workspace, avoiding hazards.
Precautions for safe use of electrical components and connections.
Recommendations for personal protective equipment and safe operating practices.
Instructions for operating and maintaining the Dremel 3D45 safely.
Device compliance with FCC rules for digital devices.
Responsibility regarding third-party intellectual property rights.
Extruder, temperature, and build volume specifications.
Physical size and weight of the Dremel 3D45 printer.
Information on compatible filament types and storage requirements.
Power requirements and recommended operating conditions.
Illustrated guide for unboxing and starting the Dremel 3D45.
Provides software, product info, support, and model downloads.
Contact information for product support, maintenance, and service.
Software to upload, edit, and build 3D files.
List of items included in the Dremel 3D45 package.
Tap to select a 3D model and begin the build process.
Select destination for your desired file: Printer, USB Drive, or Print Queue.
Tap to select a model or scroll through pages to find your model.
View nozzle and platform temperature settings for the current build.
Control the build process: Pause/Play or Stop.
Choose to proceed with printing or cancel the file.
Tap to begin the build platform leveling process.
Tap to begin filament loading or changing process.
Access individual printer functions and settings.
Connect to WiFi, set proxy, or set static IP.
Preheat extruder and build platform; Purge filament.
Move extruder and build platform to zero position.
Move extruder and build platform along X, Y, and Z-axis.
Access customer service contact information.
Adjust language, display, sounds, token, and factory reset.
View firmware version, usage counter, printer status, MAC address, and token.
Explanation of icons used on the touch screen interface.
Connect the 3D45 to a wireless network.
Register your 3D45 to your Dremel account.
Step-by-step guide to load or change filament on the 3D45.
Recommended settings for different filament types like PLA, ECO-ABS, Nylon, PETG.
Instructions for applying glue to the build platform for proper adhesion.
Guide to level the build platform using the touch screen.
Steps to connect the 3D45 to a computer via USB.
Steps to connect the 3D45 to a network via Ethernet.
Instructions to start a build from files stored on the printer.
Steps to start a build using files from a USB flash drive.
How to start a build from the online print queue.
Information on building from a computer using compatible software.
Procedure to stop or cancel an ongoing build process.
Instructions for removing print supports using needle nose pliers.
Monitor prints remotely via the Dremel Cloud Platform.
Monitor prints remotely using a web browser and IP address.
Steps to clear filament clogs from the extruder using the unclogging tool.
Methods for updating the printer firmware via network or USB.
Instructions for cleaning the printer exterior, extruder tip, and touch screen.
Information on how to update the Dremel 3D45 firmware.
Details on open source software licenses and source code availability.
General| Layer Resolution | 50 - 300 microns |
|---|---|
| Filament Diameter | 1.75 mm |
| Nozzle Diameter | 0.4 mm |
| Max Extruder Temperature | 280 °C |
| Max Bed Temperature | 100 °C |
| Technology | Fused Filament Fabrication (FFF) |
| Heated Bed | Yes |
| Print Speed | Up to 150 mm/s |
| Enclosed Print Chamber | Yes |
| Connectivity | USB, Wi-Fi, Ethernet |
| Supported Filaments | PLA, Nylon, PETG, ECO-ABS |
| Printer Dimensions | 515 x 406 x 403 mm |
| Display | Full-color touchscreen |
| Power Requirements | 100 - 240 V, 50/60 Hz |
To Next Page
