Resources
8
Glossary of Terms
Resource Description Location
Quick Start Guide
Provides illustrated walkthrough of how
to un-box your 3D45 and start building
out of the box.
Printed version of the Quick Start
Guide is located in the carton with
the printer. It is also available on
www.digilab.dremel.com
Dremel
Website
Provides the latest 3D45 software,
product information, customer support,
and 3D model and project downloads.
www.digilab.dremel.com
Dremel 3D
Customer Support
Contact Dremel for product support,
maintenance, and service.
1-844-4DRML3D (1-844-437-6533)
www.digilab.dremel.com
File Slicing
Software
Allows you to upload, edit,
and build 3D files.
Install from www.digilab.dremel.com
or from USB flash drive provided
with the Dremel 3D45.
Build Platform The flat surface used by your Dremel 3D45 to build objects. The build platform is
comprised of a tempered glass plate with a plastic holder.
Build Platform Clips Clips located at the front of the build platform base that are used to secure the build
platform in place.
Build Volume The three dimensional (3D) amount of space that an object will use once it is completed.
Your Dremel 3D45 has a maximum build volume which means that objects with a larger
build volume cannot be built unless they are resized or broken into sub-objects.
Door Your Dremel 3D45 has a door located on the front panel. This allows for easy access to
the build platform, extruder, filament, and your objects. This door is made with a
transparent material so you can monitor the progress of your objects while keeping the
build environment stable.
ECO-ABS Natural thermoplastic that provides users with durable and impact resistant parts.
Ethernet Port A local area wired networking technology that allow electronic devices to communicate.
Extruder An assembly that uses gears to pull filament through the extruder intake, heat the filament
to the build temperature, and push the heated filament out of the extruder tip.
Extruder Fans Fans used to cool the outer assembly of the extruder and gear motor.
Extruder Fan Baffle A plastic piece that directs air from the extruder fan onto the build platform to assist in
cooling the active build.
Extruder Intake An opening located at the top of the extruder where filament is inserted for building.
Extruder Lever A lever located on the side of the extruder that is used to loosen the grip of the extruder
gear motor.
Extruder Tip A nozzle located at the bottom of the extruder where heated filament is forced out for
building.
Filament A threadlike strand of plastic material.
Filament Guide Tube A plastic tube that guides the filament from the spool holder to the extruder of the printer,
preventing any snags.
To Next Page
Loading...
Need help?
General
