Dremel 3D45 User Manual

Touch Screen
15
FILE DETAILS
Nozzle and platform temperatures settings
referenced for the current build.
BUILD – Tap to begin build process.
DELETE – Tap to remove model file from on-printer
storage or USB flash drive.
COPY TO PRINTER – From USB flash drive, tap to
copy model file to on-printer storage.
BUILD STATUS
PAUSE/PLAY – Tap to pause or resume the current
build process. Pause will allow you to access the
filament button.
STOP – Tap to cancel the current build process.
PRINT QUEUE MENU
YES – Tap to proceed to print file.
NO – Tap to cancel printing of file.
DM 2610047405AB 03-18_3D45 3/27/18 9:51 AM Page 15

Dremel 3D45 Specifications

General

Layer Resolution	50 - 300 microns
Filament Diameter	1.75 mm
Nozzle Diameter	0.4 mm
Max Extruder Temperature	280 °C
Max Bed Temperature	100 °C
Technology	Fused Filament Fabrication (FFF)
Heated Bed	Yes
Print Speed	Up to 150 mm/s
Enclosed Print Chamber	Yes
Connectivity	USB, Wi-Fi, Ethernet
Supported Filaments	PLA, Nylon, PETG, ECO-ABS
Printer Dimensions	515 x 406 x 403 mm
Display	Full-color touchscreen
Power Requirements	100 - 240 V, 50/60 Hz