21
Software Install and Registration
Creating an account on Dremel3D.com is
easy and gives you access to all of the great
designs and collections that will drive and
inspire your creativity.
INSTALLING SOFTWARE FROM
DREMEL3D.COM
1. Go to Dremel3D.com.
2. From a PC: Download and install software
onto your PC.
a. Download the Dremel 3D software from
Dremel3D.com.
b. Click on Dremel 3D_(version
number).exe in the folder location that
you downloaded the file. The install
wizard will open.
c. Follow the prompts in the install wizard
to load the software on your computer.
3. From a MAC: Download and install
software onto your MAC.
a. Click Downloads and select Dremel 3D
software. Double click on the zip file and
the Dremel 3D INSTALLER.DMG will
appear.
b. Double click on Dremel 3D
INSTALLER.DMG to make a new
window open. Drag the install file to the
APPLICATIONS folder.
c. If the “Drag to Install” window did not
open, locate the Dremel 3D driver in you
device panel. Click on Dremel 3D to
download software.
NOTE: Safari users will not have to unzip
the INSTALLER.DMG file.
d. Click NEXT to launch the setup wizard.
The Dremel 3D software setup wizard
will guide you through the steps to install
the software on your computer. Click
NEXT to launch the setup wizard.
4. Create Dremel maker account on
Dremel3D.com to begin downloading
Dremel 3D20 models.
Connecting USB Cable
1. Ensure power switch is in the off position.
2. Plug your Dremel 3D20 into the computer
with the USB cable.
3. Open software.
4. Turn your Dremel 3D20 on using the
power switch to sync your computer to
your Dremel 3D20.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
