Dremel 3D20 Idea Builder User Manual

12
Kit Contents and Unpacking
Introduction
Welcome to the world of Dremel 3D. Our
mission is to mentor you through the 3D
building process and share best practices for
bringing your ideas to life. 3D building is a
process that will involve experimentation and
persistence. Thankfully, the Dremel experts
are here to make your job easier with online
tips and live support. Kick-start your success
by registering your Dremel 3D20 on
Dremel3D.com giving you access to
hundreds of high-quality models and
innovative projects. With Dremel, you can
build on your own ideas, build them better
and make them yours.
3D20 Quick Start Guide
WARNINGWARNING
READ ALL OPERATING/SAFETY INSTRUCTIONS IN THE MANUAL AND FAMILIARIZE YOURSELF WITH THE
DREMEL 3D20 BEFORE SETUP AND USE. FAILURE TO COMPLY WITH THE WARNINGS AND INSTRUCTIONS
MAY RESULT IN FIRE, EQUIPMENT DAMAGE, PROPERTY DAMAGE, OR PERSONAL INJURY.
Dremel 3D20 Instruction Manual Quick Start Guide 1 Filament Spool*
Spool Lock Power Cable USB Cable SD Card
0
.
3
m
m
C
L
E
A
R
A
N
C
E
LEVELING TOOL
TURN LEFT TO RAISE
THE BUILD PLATFORM
TURN RIGHT TO LOWER
Adjust the platform until
leveling tool slides between
the extruder and platform
with some resistance
0.3mm
LEVELING TOOL
0
E
C
C
E
m
m
m
3
3
m
0
.
3
OLOTNG IVELLE
E
C
C
E
N
N
C
A
A
N
R
A
A
R
E
L
C
m
etancsiseome rwith s
xtruder and platfthe e
s betool slideeling tvle
orm until t the platfdjusA
e
ormxtruder and platf
een ws bet
orm until
VELLE
.3mm0
OLOTNG IVEL
TF
UILD PLA
ATF
THE B
AISERTOLEFTTURN
LTORIGHTTURN
ORMTF
AISE
WEROL
Build Tape Object Removal Tool Unclog Tool Leveling Tool
KIT CONTENTS
*Do not store in moist or hot environment.
DM 2610035691 07-14_3D20 7/3/14 2:41 PM Page 12

Dremel 3D20 Idea Builder Specifications

General

Printing material	Polylactic acid (PLA)
Layer thickness (min)	0.1 mm
Number of print heads	1
Maximum build size (WxDxH)	228 x 149 x 139 mm
Control type	Touch
Product color	Blue, Grey, White
Viewing window	Yes
Display diagonal	3.5 \
Display technology	IPS
Maximum extruder tip temperature	230 °C
3D scanner	No
Compatible memory cards	SD
AC input voltage	230 V
Cables included	USB
Number of print platform stickers	2

Weight and Dimensions

Depth	335 mm
Width	485 mm
Height	400 mm
Weight	8850 g