Dremel Idea Builder 3D20-01 - Unpacking

13
1. Place box on table and cut tape.
2. Lift outer box and allow inner box to open.
3. Remove the kit contents located inside.
4. Remove carton lid from top of your Dremel
3D20.
5. Remove insert from top of your Dremel 3D20.
6. Remove tape from your Dremel 3D20 door.
7. Firmly lift the build platform to the top
position.
8. Remove inserts from inside of your Dremel
3D20.
9. Using a firm grip, lift your Dremel 3D20 out of
packaging and place gently on stable work
surface.
Unpacking
Tip: Keep packaging for future transportation and storage.
2610035691 03-18 3D20_3D20 3/8/18 10:35 AM Page 13