22
Dremel Software Overview
The toolbar icons in the Dremel 3D Software
lets you load, share, build, view, move,
rotate, and scale your objects.
Load – Click on "Load" and select a .STL file
from your computer. The model that you
selected will appear on the Dremel 3D20
home screen. The software’s home screen is
a simulation of your Dremel 3D20’s build
platform.
Build – Dremel 3D Software gives you the
ability to select build quality settings. This
allows you to customize both the build quality
and build time.
a. Export Option – Saves your model file
to local drive or portable memory drive
for building later.
b. Resolution Options – Models set to
Standard resolution will be built using the
default settings. “Standard” resolution
builds will build quickly and have good
surface quality. Models set to “Fast”
resolution will be built with thicker layers
and will build faster. Models set to
“Detailed” resolution will have finer layers
and will build more slowly.
View – Changes your view of the Dremel
3D20 home screen to one of six viewing
angles.
TIP: You can view the Dremel 3D20 home
screen from any angle by holding the right
click button of your mouse and moving the
mouse. You can also use your mouse wheel
to zoom in and out.
Move – Change your object location on the
build platform using X, Y, and Z axis
positioning. You can also center your object
in the build area and ensure that your object
is located on the platform. You can choose to
enter a custom axis position value.
1
TOOLBAR ICONS
To Next Page
Loading...
Need help?
General
