entangled cords increase the risk of electric
shock.
Use of a cord suitable for outdoor use
reduces the risk of electric shock.
Use of an
earth leakage circuit breaker reduces the risk
of electric shock.
PERSONAL SAFETY
A moment of
inattention while operating power tools may
result in serious personal injury.
Protective equipment
such as dust mask, non-skid safety shoes, hard
hat, or hearing protection used for appropriate
conditions will reduce personal injuries.
Carrying power tools with your nger on the
switch or energising power tools that have the
switch on invites accidents.
A wrench
or a key left attached to a rotating part of the
power tool may result in personal injury.
This enables
better control of the power tool in unexpected
situations.
Loose
clothes, jewellery or long hair can be caught
in moving parts.
Use of these devices can reduce dust
related hazards.
Cutting
accessory contacting a “live” wire may make
exposed metal parts of the power tool “live”
and could give the operator an electric shock.
POWER TOOL USE AND CARE
The correct power tool will do the job
better and safer at the rate for which it was
designed.
Any power tool
that cannot be controlled with the switch is
dangerous and must be repaired.
Such preventive safety
measures reduce the risk of starting the
power tool accidentally.
Power tools are dangerous in the hands of
untrained users.
If damaged, have the power tool repaired
before use. Many accidents are caused by
poorly maintained power tools.
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are
easier to control.
Use of the power tool for
operations different from those intended could
result in a hazardous situation.
BATTERY TOOL USE AND CARE
A charger that is
suitable for one type of battery pack may
create a risk of re when used with another
battery pack.
Use of any other
battery packs may create a risk of injury and
re.
Shorting the battery terminals together may
cause burns or a re.
Liquid ejected
from the battery may cause irritation or burns.
SERVICE
This will ensure that the
safety of the power tool is maintained.
SAFETY INSTRUCTIONS FOR
ALLOPERATIONS
SAFETY WARNINGS COMMON FOR
GRINDING, SANDING, WIRE BRUSHING,
POLISHING OR ABRASIVE CUTTING-OFF
OPERATIONS
Failure to follow all instructions listed
below may result in electric shock, re and/or
serious injury.
Just because the
accessory can be attached to your power tool,
it does not assure safe operation.
Grinding accessories running faster than
their rated speed can break and y apart.
Incorrectly sized accessories cannot be
adequately controlled.
Accessories that do not match the mounting
hardware of the power tool will become
unbalanced, vibrate excessively and may
cause loss of control.
If the mandrel is insufciently held and/or
the overhang of the wheel is too long, the
mounted wheel may become loose and be
ejected at high velocity.
Damaged accessories will
normally break apart during this test time.
The eye protection
must be capable of stopping ying debris
generated by various operations. The dust
mask or respirator must be capable of
ltrating particles generated by your operation.
11
To Next Page
Loading...
Need help?
General
