dreo Atom 316 - Heater Stops During Operation

Ensure that your circuit
breaker o fuse is working
properly.
No power is passing
BrRLENERERE Ensure that your heater is
placed on a flat and even
surface.
Heater does
not start
The set temperature Ensure that the
is lower than the temperature is set to be
ambient higher than the
temperature. ambient temperature.
The
temperature
Turn
off
and
unplug
exceeds the the unit. Allow it to
threshold of the cool and plug into the
thermal cutoff. electrical outlet again.
The heater
suddenly’
stops during
heating. The heater is tipped Place it on a flat, level
over. and stable surface.
In ECO mode, the heater This is normal. If your heater
will tur off automatically ~ tumns off frequently, please
when the set temperature raise the set temperature, or
has been reached. switch to Power Heat mode.
If your problem is not listed or still persists, contact our Customer
Support (see page 13).
FAN HEATER 12—