Drew Technologies CarDAQ-Plus User Manual

CarDAQ-Plus
Quick Start Guide

Drew Technologies CarDAQ-Plus Specifications

General

Brand	Drew Technologies
Model	CarDAQ-Plus
Category	Diagnostic Equipment
Language	English

Summary

Introduction

Getting to Know CarDAQ-Plus

Powering CarDAQ-Plus

Setting up the CarDAQ-Plus

Installing the CarDAQ-Plus Software to your PC

Step-by-step guide for installing CarDAQ-Plus software on a PC.

The Capabilities of J2534 and CarDAQ-Plus

Reprogramming with J2534

Explains the mandate for automakers to allow re-flashing of vehicle control units.

J2534 ToolBox

Describes the J2534 Toolbox application for managing J2534 devices and access to manufacturer info.

Updating the CarDAQ-Plus Drivers on your PC

Updating the Firmware inside your CarDAQ-Plus

Diagnostics with J2534

Specifications

CarDAQ-Plus Specifications

Details input voltage, supply current, operating temperature, and physical size.

Bus Protocols

Lists supported vehicle communication protocols like CAN, ISO15765, J1850, KWP2000, and SCI.

Other Specifications

Covers J2534 compliance, MVCI layer, programming voltage pins, and ground pins.

Connectors and Status Indicators

Front Panel

Describes the USB connector, status lights, and reset button on the front panel.

Rear Panel

Details connections for vehicle, Ethernet, analog inputs, and external programming voltage.

Vehicle Connector

Ethernet Lights

A/D Inputs Connector

Using Ethernet

Troubleshooting and Support

If all else fails...

Other Drew Tech Products