EasyManua.ls Logo

Dri-Eaz DrizAir 1200EB - User Manual

Dri-Eaz DrizAir 1200EB
6 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
07-01721B F430-230V UK 1200EB 1 Legend Brands Holdings Ltd.
Owner’s Manual
DrizAir 1200EB Portable Dehumidifier
F430-230V
LEGEND BRANDS HOLDINGS LTD.
22 Plover Close, Interchange Park, Newport Pagnell, MK16 9PS
Tel: +44 (0)1908-611-211 Fax: +44 (0)1908-611-363 www.legendbrandseurope.com
DrizAir® 1200EB dehumidifiers reduce humidity in enclosed structural environments by
removing water vapor from the air. The 1200EB is engineered to be rugged, durable and
highly portable, making them ideally suited for water damage restoration, structural drying,
construction, and other applications requiring temporary, high-performance
dehumidification.
Patents: http://www.LBpatents.com
READ AND SAVE THESE INSTRUCTIONS
SAFETY INSTRUCTIONS
WARNING! Electric shock hazard, rotating fan
hazard and hot surface hazards.
Inspect the power cord before use. If cord is
damaged, do not use. Always grasp the plug (not
the cord) to unplug.
Must be earthed. Insert three-prong plug on power
cord into a matching electrically earthed outlet. Do
not use adapter. Never cut off third prong. Do not
use an extension cord.
The unit must be operated on a 230V/50 Hz circuit
protected by a Residual Current Device (RCD)
device.
Keep motor and wiring dry.
Always unplug unit before cleaning or servicing.
Do not attempt to repair the unit. For service, contact
your local distributor.
FIRE HAZARD
Keep away from open flames and heat sources.
Do not use or store where vapors from gasoline,
solvents, thinners or other flammable materials may
be present.
BEFORE YOU BEGIN
Warranty registration
Warranty registration procedures vary by
country/market. Contact your local distributor for
assistance. Registration allows us to better assist you
with using, maintaining or servicing your equipment and
to contact you in case we have important safety
information concerning your Dri-Eaz product. If you
determine service is required, have your equipment
model, serial number and original proof of purchase
available and ask for assistance with obtaining a return
material authorization (RMA).
GROUNDING INSTRUCTIONS
This unit’s plug must be inserted into an appropriate
outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
WARNING! Improper connection of the equipment-
grounding conductor can result in a risk of electric
shock. Check with a qualified electrician or service
person if you are in doubt as to whether the outlets
are properly grounded. Do not modify the plugs
provided with the appliance if the plugs do not fit
the outlets, have proper outlets installed by a
qualified electrician.
This equipment is for use on circuits with a nominal
rating of no more than 230V.
Handle the unit carefully
Always operate the unit on a stable, level surface. Do
not drop, throw, or place where it could fall. Rough
treatment can damage the unit, and may create a
hazardous condition or void the warranty.
This unit intended for household and commercial use.
INTRODUCTION
Dehumidifiers reduce humidity in enclosed structural
environments by removing water vapor from the air. With
WARNING

Questions and Answers

  • M
    Mark FreemanAug 3, 2025
    How to troubleshoot a Dri-Eaz Dehumidifier that does not operate?
    • J
      Jennifer TaylorAug 3, 2025
      If your Dri-Eaz Dehumidifier unit does not operate, plug in the unit and check the power at the outlet and at the base of the unit. Then, switch the unit on.
  • N
    Nicole StewartAug 9, 2025
    Why is my Dri-Eaz Dehumidifier collecting too little water?
    • L
      Laura JohnsonAug 10, 2025
      If your Dri-Eaz Dehumidifier collects too little water, verify the humidity with a hygrometer and increase the room temperature. Also, check the filter and coils and clean them if necessary.
  • R
    Rachel StokesAug 15, 2025
    What to do if the blower wheel is not turning on my Dri-Eaz Dehumidifier?
    • P
      patrickchristineAug 15, 2025
      If the blower wheel of your Dri-Eaz Dehumidifier is not turning, remove the duct ring and grill, then remove the obstruction. After that, replace the duct ring and grill.
  • B
    bedwardsAug 21, 2025
    What to do if my Dri-Eaz Dehumidifier is running but the room is not dry?
    • L
      Lindsay CamposAug 21, 2025
      If your Dri-Eaz Dehumidifier is running but the room isn't drying, allow more time for drying. You can also increase air movement with air movers and reduce infiltration.
  • C
    Casey NelsonAug 27, 2025
    Why is my Dri-Eaz Dehumidifier continuously in defrost mode?
    • L
      Lindsey CortezAug 27, 2025
      If your Dri-Eaz Dehumidifier is continuously in defrost mode, increase the room temperature.

Summary

Safety Instructions

Electrical and Mechanical Hazards

Details electrical and mechanical hazards, including cord inspection and grounding.

Fire Hazard Warnings

Warns against using or storing the unit near open flames or flammable materials.

Before You Begin

Grounding Instructions

Emphasizes proper grounding and cautions against modifying plugs for safety.

Positioning a Dehumidifier

Operating Your Dehumidifier

Set Up Drain Hose

Details connecting and routing the condensate drain hose for safe water removal.

How to Use the Control Panel

PURGE Key Operation

Explains the PURGE function for manually emptying the pump reservoir.

Error Messages

Maintenance Schedule

Troubleshooting and Specifications

Dri-Eaz DrizAir 1200EB Specifications

General IconGeneral
Airflow300 CFM
RefrigerantR410A
ModelDrizAir 1200EB
Dehumidification Capacity120 pints/day
FeaturesAutomatic Defrost, digital controls
Operating Temperature Range33°F to 100°F
Amperage5.7 A
DrainageCondensate pump

Related product manuals