Dri-Eaz EnviroBoss 1400 User Manual

07-01583B 06-07 Copyright 2007 Dri-Eaz Products, Inc. 1
Owner’s Manual –
Dri-Eaz
®
EnviroBoss
™
1400
DRI-EAZ PRODUCTS, INC.
15180 Josh Wilson Road, Burlington, WA USA 98233
Fax: (360) 757-7950 Phone US: (360) 757-7776 www.dri-eaz.com
The EB1400 is a highly transportable system, offering cooling, heating and dehumidification. It’s ductable for spot cooling
and directing conditioned air or heat into specific spaces.
Read And Save These Instructions
Read and understand manual before operating.
ELECTRIC SHOCK HAZARD
WARNING! Unit must be grounded.
• Use indoors only.
• Keep out of water.
• Keep electrical components dry. If they get wet, allow
them to dry before using the EB1400.
• Insert 3-prong plug on power cord into a matching
electrically grounded outlet. Never cut off third prong.
FIRE HAZARD
• Keep air intakes clear of obstructions and dirt.
Reduced airflow can cause motor to overheat. Keep
away from draperies or other material that could block
air intakes. See maintenance instructions.
• Keep air filter clean. Keep filter clear of clogging, oil,
grease or other contaminants that can be drawn into
the EB1400.
SAFETY INSTRUCTIONS
WARNING! Unplug unit before opening housing for
cleaning or servicing.
• Turn off unit and unplug before lifting or moving.
• Handle the unit carefully. Always operate the unit on a
stable, level surface. Do not drop, throw, or place
where it could fall. Rough treatment can damage the
unit, and may create a hazardous condition or void
the warranty.
• Inspect the power cord before use. If cord is
damaged, do not use. Replace with a cord of the
same type and amperage rating. Protect cord from
damage by turning off unit before unplugging. Always
grasp the plug (not pulling on the cord) to unplug.
• The unit is designed to operate on a 115V/60 Hz,
15-amp circuit. Make sure that the electrical outlet is
grounded.
• Secure during transport to prevent sliding and
possible injury to vehicle occupants.
• Keep children away from unit. Be sure unit is
inaccessible to children when unattended.
• Do not attempt to disassemble or repair the unit.
For Authorized Service Centers, go to
www.dri-eaz.com/HOWTOBUY
or call Dri-Eaz
Service at 800-932-3030.
INTRODUCTION
The EB1400 is a versatile unit providing dehumidification, 1-ton
cooling with 470 CFM across the evaporator and 750 CFM
across the condenser, plus focused heating and ventilation.
The unit is ductable for spot cooling and directing conditioned
air or heat into specific spaces while filtering room air and
pumping out condensate.
FEATURES:
• Ducts to and from unit for heating and cooling.
Note: Duct adapters for condenser inlet and outlet
and evaporator outlet. No duct adapter for evaporator
inlet
• Refrigeration system that dehumidifies while it heats
or cools
• Uniform 8” ducting size for all outlets
• Digital temperature control
• Durable rotomolded duct rings and housing
• Wheel casters for ease of transport
W
ARNING

Dri-Eaz EnviroBoss 1400 Specifications

General

Brand	Dri-Eaz
Model	EnviroBoss 1400
Category	Dehumidifier
Language	English

Summary

Safety Instructions

Electric Shock Hazard

Warnings regarding electrical safety, grounding, and water exposure.

Fire Hazard

Precautions to prevent overheating and fire risks from obstructions.

General Safety Precautions

Guidelines for handling, operation, and keeping children away from the unit.

Introduction and Features

Product Features

Highlights the unit's capabilities like cooling, heating, dehumidification, and ductability.

Operating Instructions

Getting Started

Initial steps for placement, power connection, and setting temperature controls.

Operating Range

Specifies the recommended ambient temperature range for optimal unit performance.

Cycle Times and Compressor Protection

Explains the automatic delay feature to protect the compressor from short cycling.

Thermostat Operation

Test Thermostat

Procedure for testing the heating and cooling functions of the thermostat.

Viewing Set Temperature

How to display the current setpoint temperature and differentiate it from room temperature.

Changing Set Temperature

Steps to adjust the desired temperature setting using the keypad.

High Temperature Safety Switch

Description of the automatic shutdown feature at high room temperatures.

Resetting Thermostat

Procedure to reset the thermostat to its default factory settings.

Ducting and Applications

Ducting Instructions

Guidelines for connecting ductwork for various operating modes.

Applications

Examples of how to use ducting for cooling, heating, and dehumidifying.

Transporting and Storing

Transporting Unit

Instructions for safely moving and securing the unit during transport.

Storing Unit

Guidance on proper storage to prevent damage.

Maintenance

Before Each Use

Inspection of the power cord for any damage.

Weekly Maintenance

Cleaning and inspection of the front filter.

Monthly Maintenance

Includes exterior inspection, cleaning, and back filter inspection.

Specifications