Dri-Eaz F203-A User Manual

Owner’s Manual
DrizAir 1200 Dehumidifier
Model F203-A
DRI-EAZ PRODUCTS, INC.
15180 Josh Wilson Road, Burlington, WA 98233
Phone: 800-932-3030 Fax: 360-757-7950 www.dri-eaz.com
The DrizAir
®
1200 dehumidifier reduces humidity in enclosed structural environments by
removing water vapor from the air. The 1200 is engineered to be rugged, durable and highly
portable, making them ideally suited for water damage restoration, structural drying,
construction, and other applications requiring temporary, high-performance dehumidification.
Patents: http://www.LBpatents.com
READ AND SAVE THESE INSTRUCTIONS
SAFETY INSTRUCTIONS
WARNING! Electric shock hazard, rotating fan, hot
surface hazards. Unplug unit before opening cover
for cleaning or servicing. Unit must be grounded.
• Inspect the power cord before use. If cord is
damaged, do not use. Always grasp the plug (not
the cord) to unplug.
• Insert three-prong plug on power cord into a
matching electrically grounded outlet. Do not use
adapter. Never cut off third prong. Do not use an
extension cord.
• The unit must be operated on a 115V/60 Hz circuit
protected by a Ground Fault Circuit Interrupter
(GFCI) device.
• Keep motor and wiring dry.
• Do not attempt to repair the unit. Contact your local
authorized distributor for service.
BEFORE YOU BEGIN
Unpacking your unit
Retain all packing material and boxes for possible
equipment returns.
Install the handle
The 1200 is shipped without the handle attached. Install
the handle using the four ¼-20 hex washer-head bolts
supplied and a ⅜ in driver or wrench. Make sure the
bolts are firmly secured before using the unit. Do not
overtighten.
Warranty registration
Visit warranty.drieaz.com to register your purchase.
Registration allows us to better assist you with using,
maintaining or servicing your equipment, as well as to
contact you in case we have important safety information
concerning your Dri-Eaz product. If you determine
service is required, have your equipment model, serial
number and original proof of purchase available and call
your distributor for assistance with obtaining a return
material authorization (RMA).
INTRODUCTION
Dehumidifiers reduce humidity in enclosed structural
environments by removing water vapor from the air. With
proper use, the 1200 can help dry carpet, carpet pad,
floors, walls, building contents and more. Using
dehumidifiers can also help prevent secondary damage
caused by high humidity. For best results, use the 1200
with Dri-Eaz TurboDryer
®
airmovers placed around the
perimeter of the room to distribute heat energy and
release moisture from wet surfaces into the air.
How the 1200 dehumidifier works
Dri-Eaz refrigerant dehumidifiers operate by pulling
moist air in across a very cold evaporator core. The
moisture in the air condenses on the coil. In certain
conditions, the machine operates in defrost mode,
warming any frost accumulated on the evaporator coil
back into water. The water collects in a tray and is
pumped out through a hose.
IMPORTANT: Before moving the unit, make sure there’s
no water in the pump. See how to use the PURGE
function under “How to use the control pad” on page 2
.
WARNING
07-01705C F203-A 1 Dri-Eaz Products, Inc.

Dri-Eaz F203-A Specifications

General

Brand	Dri-Eaz
Model	F203-A
Category	Dehumidifier
Language	English

Summary

Safety Instructions

Critical Safety Warnings

Electric shock, rotating fan, and hot surface hazards. Unplug before servicing or cleaning.

Introduction to the Dehumidifier

How the 1200 Dehumidifier Works

Explains the process of removing moisture using an evaporator core and defrost mode.

Positioning Your Dehumidifier

Managing Temperature Rise

Guidance on managing drying temperatures for optimal results and preventing overheating.

Operating Your Dehumidifier

Set Unit Upright

Ensure proper operation by setting the unit upright for at least 30 minutes after transport.

Set Up Drain Hose

Instructions for correctly connecting the condensate drain hose for safe water removal.

Plug in Electrical Cord

Details on connecting the unit to a standard 115-volt grounded outlet.

Turn the Unit On

Simple instruction to power on the dehumidifier using the touchpad interface.

Control Panel Overview

Explanation of the touchpad display, keys, and normal operating messages.

Operational Modes and Functions

Purge Function

Manual process to empty the pump reservoir, essential before moving the unit.

Defrost Mode

Description of the automatic defrost cycle triggered by frost on the evaporator coils.

Error Messages and Troubleshooting

Error Messages

Information on common error codes and initial troubleshooting steps for unit diagnostics.

End of Job Procedures

Final steps after job completion, including purging water and preparing for transport.

Maintenance and Error Codes

Maintenance Before Each Use

Pre-use checks: inspect power cord, vacuum air filter.

Monthly Maintenance

Monthly checks: inspect coils and catch basin tray.

Specific Error Messages

Details on error codes (ER 1-9) with explanations and solutions.

Troubleshooting

General Troubleshooting Advice

Advice for issues not covered in error tables, directing users to contact support.

Specifications and Contact Information

Unit Specifications

Technical details including model, type, weight, dimensions, power, and performance ratings.

Contact Dri-Eaz Products

Provides contact details for Dri-Eaz Products, Inc., including address and phone number.