To Next PageTo Next PageWhat to do if my Drieaz F571-230V Dehumidifier does not operate?
If your Drieaz Dehumidifier isn't operating, first ensure the unit is switched on. If it still doesn't work, check that the unit is properly plugged into a working wall outlet and that the power cord connection is secure.
Why is my Drieaz F571-230V Dehumidifier running but the room is not dry?
Several factors can cause this. It may simply need more time to dry the room. Also, poor air movement could be a factor, so try increasing air circulation with air movers. Finally, check for excessive moist air infiltration and seal off the area to reduce it.
What to do if my Drieaz Dehumidifier collects too little water?
If your Drieaz Dehumidifier isn't collecting enough water, several things could be happening. First, the room air may already be dry, so confirm the humidity level using a hygrometer. The room temperature could also be too low, so try increasing it. Additionally, a clogged filter or coils can cause this issue, so inspect and clean or replace them as needed.
General| Brand | Drieaz |
|---|---|
| Model | F571-230V |
| Category | Dehumidifier |
| Language | English |
Covers electric shock, fan, hot surface, fire hazards, grounding, and careful handling of the unit.
Includes warranty registration and initial setup considerations before operating the dehumidifier.
Guidance on setting the unit upright and optimal placement for effective dehumidification.
Steps to turn on the unit, including delay and diagnostic processes.
How to access and adjust user-configurable display and system settings.
Instructions for connecting the drain hose for safe water removal.
Guidance on properly plugging the unit into an electrical outlet.
Explanation of initial startup displays and normal operating screen.
Detailed explanation of ON/OFF, DISPLAY MENU, MENU SELECTION, and PURGE buttons.
Accessing and modifying system settings and viewing operational information.
Options to reset operating job hours and view inlet/outlet data.
Tracking filter/coil cleaning hours and configuring humidistat settings.
Options to change display language and temperature units (°F or °C).
Viewing firmware version, coil temperature, current, and sensor ID.
Steps to properly shut down, including defrost and purge cycles, for storage.
Precautions for safely moving, transporting, and storing the dehumidifier.
Safety warnings and required tools for performing maintenance tasks.
Checks to perform before each use and monthly maintenance tasks.
Explanation of various system status and diagnostic messages displayed by the unit.
Details on specific error codes (ER4-ER9) and their corresponding solutions.
Identifies common problems, their causes, and recommended solutions.
Detailed specifications for both Model F571-230V and F571-110V units.
List of components included with the unit and filter reorder information.
