DRIFT HD Ghost - Precautions and Safety Guidelines; General Precautions; Weather Resistance; Important Attention Notices

43
about your camera initial setup
MENU / Tag / Back Button
LEFT Button / Zoom Out
RIGHT Button / Zoom In
ACTION Button
(On/O/Rec/Stop)
Status LED
Rear Hatch
2.0” LCD Screen
300° Rotating Lens
USB Port (Mini-B)
HDMI Port (Mini-C)
3.5mm Microphone Input
Micro SD Card Slot
Battery Slot Cover
A
D
CB E
F G
H
I
J
K L
1. Unscrew and remove the
rear hatch
2. Insert a Class 6 or higher
micro SD card
3. Lift the hinged battery
slot cover and insert the
battery as shown (below)
4. Connect the camera
via mini USB cable to a
powered USB port and
charge the battery for 4
hours before first use
5. Replace the rear hatch
and screw shut to secure