DRIFT HD Ghost - Using the Camera; Initial Setup Guide; Micro SD Card Selection and Formatting; Powering On;Off and Charging

87
mode selection & settings
VIDEO MODE
(Green LED) The camera
will record video when
ACTION is pressed on the
camera or remote. The LED
will turn solid red while
recording. Press ACTION on
the camera, or STOP on the
remote, to end recording.
MODE SELECTION MENU
The Mode Selection menu
displays the icons for the
four camera modes.
Highlight the desired mode
and press ACTION.
The screen will return
to Live Preview and the
camera is ready to record.
TIMELAPSE MODE
(Purple LED) The camera
will capture a series of still
images at a specified rate
when ACTION is pressed
on the camera or remote.
To stop recording, press
ACTION on the camera or
STOP on the remote.
PHOTO MODE
(Yellow LED) The camera
will capture still images
when ACTION is pressed
on the camera or remote.
The LED will blink red every
time a photo is taken (this
applies for Timelapse and
Photoburst modes also).
PHOTOBURST MODE
(Cyan LED) The camera
will capture a burst of still
images for an allotted
duration, at a specified
rate, when ACTION on the
camera or remote is pressed
(for best results, use a Class
6 or higher micro SD card).
MODE SETTINGS
The Mode Settings menu
displays the icons for the
settings of the four camera
modes. Highlight the
desired mode and press
ACTION. The screen will
show the list of settings for
the chosen mode.
VIDEO SETTINGS
• Video Resolution
• Frame Rate
• FOV
• Exposure
• Self-Timer
• Video Tagging (see p10)
• Video Format
PHOTO SETTINGS
• Photo Resolution
• FOV
• Exposure
• Self-Timer
TIMELAPSE SETTINGS
• Photo Resolution
• FOV
• Exposure
• Sequence Interval
• Self-Timer
PHOTOBURST SETTINGS
• Photo Resolution
• FOV
• Capture Rate
• Burst Duration
• Exposure
• Self-Timer
• Default Settings
Video
Timelapse
Photo
Photoburst