Drill Master 40070 - Operating the Sander

Page 10
For technical questions, please call 1-800-444-3353.
Item 40070
SAFETY OPERATION MAINTENANCESETUP
Maintenance and Servicing
P
rocedures not specifically explained in this manual must
be performed only by a qualified
technician.
TO
P
REVENT SERIOUS INJUR
Y
REVENT SERIOUS INJURYREVENT SERIOUS INJUR
FROM
Y FROMY
A
CC
IDENTAL
O
P
ERATION:
Make sure that the Switch is in the off
-
position and
unplug the tool from its electrical
outlet
before performing any inspection, maintenance, or cleaning
procedures.
TO
P
REVENT SERIOUS INJUR
Y
REVENT SERIOUS INJURYREVENT SERIOUS INJUR
FROM TOOL FAILURE:
Y FROM TOOL FAILURE:Y
Do not use damaged equipment.
If
abnormal
noise or vibration
occurs, have the problem corrected before further use.
C
leaning, Maintenance, and
Lubrication
1.
BEFORE EA
C
H USE,
inspect the general
condition of the tool. Check for:
•
loose hardware,
•
misalignment or binding of moving parts,
•
cracked or broken parts,
•
damaged electrical wiring, and
•
any other condition that may
affect its safe
operation.
2.
AFTER USE,
wipe external surfaces
of the tool with clean cloth.
3.
Make sure the vents on the top
are clear of dust and debris.
4.
WARNING! If the supply cord
of this power tool is damaged,
it must be replaced only by a
qualified service
technician.
P
LEASE READ THE FOLLOWING
C
AREFULL
Y
AREFULLYAREFULL
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND
ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE
MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY
OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS
TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF
THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY
STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN
BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE
BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS
TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING
OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS
THERETO.
Record
P
roduct’s Serial Number Here:
Note:
If product has no serial number, record month and year of purchase instead.
Note:
Some parts are listed and shown for illustration purposes only,
and are not available individually as replacement
parts.